Internal Hardwood FD60 Fire Door Lining

About this frame

The Internal Hardwood FD60 Fire Door Lining is designed for use with FD60-rated doors up to 926mm wide, 2040mm high and 54mm thick and can easily be cut down to suit narrower/shorter doors.  

This FD60 door frame is supplied trenched out to accept 15mm x 4mm self-adhesive intumescent strips, these are included and will be supplied as 6no fire and smoke in White. 

This frame is available in options to suit different wall thicknesses.

Pack Contents:

• 1 x head to suit a door up to 926mm wide.
• 2 x jambs (legs) to suit a door up to 2040mm high.
• Door stops to suit a door up to 926mm and 2040mm high.
• 6 x Intumescent Strip - Fire & Smoke - White

Certification

This frame is only suitable for FD60-rated applications. We would always advise checking your fire door certification to ensure this frame meets the minimum requirements set out by the certification document. If you are at all unsure about the suitability of your door and frame combination, we’d also recommend speaking to a building inspector/your local planning office.

Often the fire door certification would specify the specification of the frame required to ensure compliance.

Finishing

These casings are supplied unfinished meaning they can be finished to match any décor. They can be stained or painted to your preference.

Things we thought you should know!

Please note: these frames are supplied as a kit, assembly is required on-site. 

Complete your FD60 fire door with our range of fire door hardware or shop all internal fire doors.