Glazed 18G Oak Re Flush FD30 Fire Door
Key features
- Material: Oak
- Application: Internal
- Fire Rating: FD30 Fire Door
- Glazing Type: Pre Glazed
- Finish Type: Pre-Finished
About this door
The 18G Oak Flush FD30 Fire Doors are an incredibly popular choice where cost, practicality and simplicity are paramount.
Often used in commercial applications, these simple, yet functional glazed fire doors are a great choice for a range of purposes.
As a pre-finished door, the Oak grain is fantastically showcased with a clear lacquer.
Unlike other options, these doors offer a subtle level of individuality whilst maintaining uniformity from one door to the next. This means that if you are looking to use two doors together as a pair, or multiple doors within close proximity, these will be a better match in terms of a more consistent grain and colouring.
Featuring a 150mm x 1150mm glazing aperture towards one side of the door, these doors are supplied either unglazed with mitred and pinned beading or with an option of factory pre-glazing, in accordance with BWF specifications. If a fire certificate is required, these doors must either be factory glazed or glazed following purchase using the recommended specifications under certified conditions.
These pre-glazed internal fire doors offer 30 minutes of protection when installed in accordance with the instructions/compliance with the fire certificate.
Shop all Internal Fire Doors
18G Oak Flush FD30 Fire Door£185.30
18G Oak Flush FD60 Fire Door£474.55
Oak Flush FD30 Fire Door£142.80
GO1 Oak Re Flush FD30 Fire Door£238.00
Custom Sizes - Fire Doors
On this product, there is an option to have the door made to a custom size. There is an additional charge for this service (see size dropdown box for details).
The maximum dimensions we can offer would be 915mm (36") x 2040mm (80 ¼"). Anything outside of these measurements may require an additional charge or in some cases may not be able to be manufactured, please call us on 01142557800 before placing your order.
Lead times for the manufacture of custom sized products are approximately six to eight weeks.
Please be aware that during certain times of the year, such as Christmas, festive and religious periods, this lead time may increase.
Fire Door Glazing Options
These doors are supplied either unglazed (supplied with mitred and pinned beading) or with an option of factory pre-glazing in one of the following:
Georgian Wire Polished Plate factory glazing:
Clear Pyroguard factory glazing:
Sandblasted Georgian Wire Polished Plate factory glazing:
Satin Pyroguard factory glazing:
For the doors to meet BWF Certification (FD30 Regulations), a factory glazed option must be chosen.
Decoration and Finishing - Pre-Finished Oak
Supplied pre-finished with a clear satin lacquer, these doors are factory finished. This requires no further decorating on site and creates a fantastic look which really does show off the quality of the oak veneer.
The correct storage, fitting and finishing of your new door/s are very important factors in getting the best out of your purchase.
Before finishing your door, we would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.
If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.
What is Engineered Timber?
These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.
The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.
They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!
Need More Information?
If there is anything you are unsure of, our friendly team are here to help.
Give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.
