External Flush FD30 Fire Door

SKU: Select from the options below
From (inc VAT)
£144.50
  • Add to favourites

Key features

  • Material: Hardwood
  • Application: External
  • Fire Rating: FD30 Fire Door
  • Finish Type: Ready to finish
  • Core: Solid Core
  • Style: Flush

About this door

The External Flush FD30 Fire Door is an incredibly popular choice where cost, practicality and simplicity are a priority.

Ideal for replacement and refurbishment projects, the hardwood face material has an attractive woodgrain pattern to suit residential or commercial applications.

These doors are supplied unfinished, it's ready for painting or staining to match your specific design preferences.

These hard-wearing external fire doors offer 30 minutes of protection when installed in accordance with the instructions/compliance with the fire certificate.

Please note the door woodgrain may vary slightly to the images shown.

Supplied unfinished, these doors are able to take a stain or paint finish. A range of products would be suitable, including Impranol, which is available from the "Stains, Paints and Finishes" section of our website.

The correct storage, fitting, and finishing of your new doors are very important factors in getting the best out of your purchase.

Please always avoid the use of water-based finishing products as this may cause the door to bow, warp or delaminate. Using these types of products will invalidate your guarantee.

Before finishing your door, we would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.

If there is anything you are unsure of, you are more than welcome to give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.

These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.

The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.

They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!

If there is anything you are unsure of, our friendly team are here to help.

Give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.