Oak Kingston FD30 Fire Door

SKU: Select from the options below
From (inc VAT)
£225.00
  • Add to favourites

Key features

  • Material: Oak
  • Application: Internal
  • Fire Rating: FD30 Fire Door
  • Finish Type: Ready to finish
  • Core: Solid Core
  • Brand: Deanta
  • Style: 4 Panel

About this door

The Internal Oak Kingston Fire Door from Deanta Doors is a perfect choice for most properties. The beautiful oak grain fits in perfectly with traditional and contemporary décor creating an aura of elegance.

This door features a classic flat panel design with unique extra wide rails.

Rated FD30, this means our Internal Oak Kingston Fire Door is fire resistant for 30 minutes, allowing time to safely escape in the event of a fire. Each fire rating is backed up by comprehensive independent testing and certifications to ensure FD30 doors perform as expected.

Complete your fire door with our range of fire door hardware or shop all internal fire doors.

Maximum adjustment (top):
15mm
Maximum adjustment (bottom):
15mm
Maximum adjustment (left):
15mm
Maximum adjustment (right):
15mm

Supplied unfinished, these doors are able to take a stain or paint finish. 

The correct storage, fitting, and finishing of your new doors are very important factors in getting the best out of your purchase.

Please always avoid the use of water-based finishing products as this may cause the door to bow, warp or delaminate. Using these types of products will invalidate your guarantee.

Before finishing your door, we would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.

These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.

The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.

They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!

If there is anything you are unsure of, our friendly team are here to help.

Give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.

You may need