Oak Hagan FD30 Fire Door

Custom size

On this product, there is an option to have the door made to a custom size.

The maximum dimensions we can offer would be 900mm (35 1/2") x 2040mm (80 1/4"). Anything outside of these measurements may require an additional charge or in some cases may not be able to be manufactured, please call us on 01142557800 before placing your order. 

Lead times for the manufacture of custom size products are approx. 16-20 weeks. There is an additional charge for this service (see size dropdown box for details).

Please be aware that during certain times of the year, such as Christmas, festive and religious periods, this lead time may increase by up to 4 weeks. 

Custom size Express

On this product, we are able to manufacture a speedier option in our UK factory.

The maximum dimensions we can offer would be 930mm (36.6") x 2150mm (84.6"). 

Lead times for the manufacture of custom size express products are approx. 4-5 weeks. There is an additional charge for this service (see size dropdown box for details).

Please be aware that during certain times of the year, such as Christmas, festive and religious periods, this lead time may increase.

Supplied unfinished, these doors are able to take a stain or paint finish. Our recommendation for a natural, clear finish would be to use a Treatex Hardwax Oil, which is available from the "Stains, Paints and Finishes" section of our website.

On this product, there is also an option for the door to be supplied pre-finished by our french polisher. If you select this option, your door will be supplied pre-finished to a professional standard.

Your door will be pre-sanded with 180 grit sandpaper before being sprayed with a base coat of A/C lacquer. When dry, the door is then "de-nibbed" by hand and sprayed with further top coats of A/C lacquer, specially formulated for doors and internal joinery.

This achieves a great looking semi-matt finish which is resistant to knocks and finger marks and is smooth to the touch.

Selecting this option will add approximately a week to any estimated lead time.

The correct storage, fitting, and finishing of your new doors are very important factors in getting the best out of your purchase.

Please always avoid the use of water-based finishing products as this may cause the door to bow, warp or delaminate. Using these types of products will invalidate your guarantee.

Before finishing your door, we would always recommend reading our Door Care information which can be viewed by clicking here, along with any additional manufacturer's documentation supplied with the door itself.

These doors are manufactured using laminated veneered lumber (LVL). LVL or more commonly known as “engineered timber” is a modern method of construction that is economical with the use of natural timber resources.

The main parts & rails of the door are usually constructed using solid strips/blocks of timber (some internals may contain a laminated board and/or particleboard), which are then glued and then clamped together.

They are then faced with a veneer and edged with a solid timber “lipping”. The benefits of using engineered construction doors over more traditional methods are that it is far more unlikely to twist or split (we do not get problems with panels splitting) and possibly the most important reason is that it is much more eco-friendly!

View this door in 3D! Spin, zoom and swipe to view this door from all angles to make sure it's the perfect fit for you! Click on the 3D viewer icon in the image gallery to get started. 

Please note, as timber is a natural product the door may look different in person and we cannot guarantee that door will be the same shade, finish, or grain pattern. 

If there is anything you are unsure of, our friendly team are here to help.

Give us a call to discuss on 0114 2557800 or drop us an email at info@doordeals.co.uk.